This blog, in addition to the usual maintenance details for classic mini cars, an attempt is made to explain the "whys" and "wherefores" of the various jobs.

Saturday 17 April 2010

The "hierarchy"

Let's get the yellow hose to the snorkel. It connects the valve with the ThermAC ThermAC switch. The valve is used during a cold start to the fact that as soon as possible to the engine block pre-heated by air drawn in is to rapidly provide proper exhaust emissions. How the switch works exactly, I do not know, but I think it can, depending on the temperature (should be a bi-metal switch) be something of the pressure valve in the snorkel through to fill this order - if necessary. The switch should operate in both directions, Wierum the hoses are connected not have to worry. (If not please contradict! Bin as well versed soo not.)

ThermAC switch from the red hose goes to the intake manifold. (Photos from the engine coming soon. As long as simply hope that the old bottles are still there to hinzuhangeln around.)

From there is the short hose (in black / white) for connection to the gas trap. The petrol is the case, held by a bracket on the fire wall (separation between the engine and passenger compartment) to the left / behind the air box. Remove the Lufi best, makes it easier to work a lot easier.

The connections are designed so that a "reversed polarity" is almost impossible (but "is not" is not, therefore, to note that the management ECU ran to the green connector to be! ). The long, green-coded cable leads for connection to the underside of the ECU next to the connector of the engine wiring harness. 

0 comments: